Difference between revisions of "NOC-HD"

From SHA2017 Wiki
Jump to: navigation, search
m (small update)
(fixed the planned shifts)
Line 10: Line 10:
 
''Planned shifts are:''
 
''Planned shifts are:''
  
Thur 3. AUG 16:00-20:00 4 runners
+
Thur 3. AUG 16:00-20:00 4 runners<br>
Friday 4th AUG 9:00 - 22:00 @4 runners
+
Friday 4th AUG 9:00 - 22:00 4 runners<br>
Saturday 5th 9:00 - 20:00 alternating shifts (2 runners) and 1 Helpdesk shift
+
Saturday 5th till 7th 9:00 - 20:00 alternating shifts (2 runners) and 1 Helpdesk shift<br>
6th to 9th see above and one helpdesk shift
+
8th starting 8:00 Runners, and starting 1 hour before closing event complete disconnect  - needs 4 runners<br>
8th starting 8:00 Runners, and starting 1 hour before closing event complete disconnect  - needs 4 runners
 
 
 
  
 +
<br>
  
  

Revision as of 13:25, 3 August 2017

Basics:

  • Each shift that had a runner-shift will hand over their Key, map and the current status to the next shift
  • 2 Teams with 2 Folks each
  • Train newbies with experienced runners by taking them along
  • Take care of the maps

if you want to optimize the shift walk, suggest a new map and get it laminated. Only until the days

Shift ranges: Planned shifts are:

Thur 3. AUG 16:00-20:00 4 runners
Friday 4th AUG 9:00 - 22:00 4 runners
Saturday 5th till 7th 9:00 - 20:00 alternating shifts (2 runners) and 1 Helpdesk shift
8th starting 8:00 Runners, and starting 1 hour before closing event complete disconnect - needs 4 runners



Take with you:

  • Key
  • Map
  • DECT
  • Remember noc HD number
  • Leave your dect number at NOC-HD if they dont know it already


Go to to each datenklo, find the cables which are stuck in the small loop. Plug them into Ports 5 and higher.

If you find a cable which is disconnected on the other end and rolled up in front of the DK; unplug it from the switch and leave it there.

Be careful, the fibres are sometimes a bit crazy in the datakloset.

Network status:

  • if the torch is fully animated, the network is on
  • if the torch is just white, there is power but no uplink
  • if the torch is off, then there is no power