NOC-HD

From SHA2017 Wiki
Revision as of 12:51, 3 August 2017 by Pcdog (talk | contribs) (ruff summary)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Basics:

- 2 Teams with 2 Folks each - Train newbies with experienced runners by taking them along - Take care of the maps

if you want to optimize the shift walk, suggest a new map and get it laminated. Only until the days

Shift ranges: Planned shifts are:

Thur 3. AUG 16:00-20:00 4 runners Friday 4th AUG 9:00 - 22:00 @4 runners Saturday 5th 9:00 - 20:00 alternating shifts (2 runners) and 1 Helpdesk shift 6th to 9th see above and one helpdesk shift 8th starting 8:00 Runners, and starting 1 hour before closing event complete disconnect - needs 4 runners



Take with you: - Key - Map - DECT - Remember noc HD number


Go to to each datenklo, find the cables which are stuck in the small loop. Plug them into Ports 5 and higher.

If you find a cable which is disconnected on the other end and rolled up in front of the DK; unplug it from the switch and leave it there.

Be careful, the fibres are sometimes a bit crazy in the datakloset.

Network status: - if the torch is fully animated, the network is on - if the torch is just white, there is power but no uplink - if the torch is off, then there is no power